Heat Pump Replacement in Highland, CA
- One system that heats and cools, sized by measurement
- Written quote with model numbers and efficiency ratings
- Rebate and utility paperwork filled out for you
- Most changeouts done in a single day
- Permit pulled and warranty registered in your name
One System for Both Seasons, Set up the Right Way
Sized for the House, Both Ways
A heat pump has to satisfy the cooling load in August and the heating load in January. We calculate both instead of matching the tonnage that came off the pad.
Electrical Checked First
Breaker size, wire gauge, and disconnect all get verified before we quote. Finding out on install day that the panel needs work is not a surprise you should pay for twice.
Charged by Weight and Readings
Line set evacuated to a real micron level, refrigerant weighed in, then superheat and subcooling verified in both modes. Topping off by feel is how compressors die early.
Rebates and Permits Handled
We pull the permit, meet inspection, register the warranty, and fill out the rebate paperwork you qualify for. You should not have to chase any of that.
What People Say After the Truck Leaves
"Replaced our old AC and furnace with one heat pump. Electric bill dropped and the house holds temperature much better than the old setup ever did."
"They explained the difference between the single stage and variable speed options without any pressure. Install crew was clean and the walkthrough at the end was thorough."
"Handled the rebate paperwork and the permit. Showed me the charge readings on the gauges before they packed up. That was a first for me."
Replacing Both the AC and the Furnace?
A heat pump often covers both for less than two separate changeouts. We will price it both ways so you can compare.
How We Approach a Heat Pump Replacement
Our climate is close to ideal for a heat pump. Winter lows here rarely sit where a heat pump loses efficiency, and summer is exactly what the equipment is built for. That means one outdoor unit and one air handler can replace an aging AC and furnace pair, which is why more of these changeouts show up on our schedule every year.
Replacing a heat pump is not the same job as swapping a condenser. Here is what actually goes into ours:
- Load calculation for both heating and cooling so the unit is not oversized for one season and short on the other.
- Line set inspection and, when the old system used a different refrigerant, either a proper flush or a new line set.
- Electrical verification covering breaker size, wire gauge, and disconnect condition before the quote is written.
- Static pressure test on the ducts, since a variable speed system will expose restrictions the old unit muscled through.
- Auxiliary heat sizing and lockout settings so backup strips do not run every time the outdoor temperature dips.
- Thermostat matched to the equipment, because a heat pump on a standard AC thermostat will fight itself.
What we see on local heat pump jobs
Sun exposure drives a lot of the sizing here. Homes along Greenspot Road and up the east side get full afternoon load with very little shade, and a unit sized off square footage alone will run flat out on the hottest afternoons. We factor the exposure in, which sometimes means a variable speed system makes more sense than simply going up a half ton.
The other issue is leftover duct from the gas furnace days. Heat pumps deliver air at a lower temperature than a furnace, so airflow matters more. In older homes near the Base Line corridor we often find duct that was fine with 130 degree supply air and clearly undersized once the supply drops to 95. We test for that before you buy anything, not after.
What the replacement process looks like
- 1
Evaluation and Measurements
We measure the home, test static pressure, check the panel, and ask which rooms have never been comfortable.
- 2
Options in Writing
Single stage, two stage, and variable speed compared with real prices, efficiency ratings, and warranty terms.
- 3
Removal and Prep
Old equipment recovered and removed, pad set or leveled, line set handled, and electrical brought current.
- 4
Install and Commissioning
New system set, evacuated to spec, charge weighed in, and both heating and cooling modes verified with readings.
- 5
Walkthrough and Paperwork
Thermostat setup, filter access, and maintenance basics, then permit inspection, warranty, and rebate forms.
Is a heat pump right for your house
For most homes in this service area, yes. You get cooling and heating from one system, no gas combustion to inspect, and efficiency that fits our winters. Homes with an existing gas line and a newer furnace sometimes do better with a dual fuel setup, where the heat pump handles most days and the furnace takes over on the coldest mornings.
The wrong reason to buy one is because a salesperson said it was the future. Highland Heating & Air will run the numbers for your home, show you what your current system costs to operate, and let you decide with the actual figures in front of you.
More Ways We Keep Your Building Comfortable
Heating
Reliable warmth when the temperature drops
Cooling
Keep the heat outside where it belongs
Specialized
Custom comfort and whole-system care
Proudly serving the Inland Empire.
Highland is home base, and we run calls all over San Bernardino County every week. Don't see your city? Give us a call and we'll tell you straight.
Heat Pump Replacement Questions, Answered
In this area, yes. Our winter mornings sit well above where a modern heat pump struggles, and the backup heat strips cover the rare cold snap. The systems that get a bad reputation are usually installed in climates that drop below freezing for weeks.
That is a dual fuel setup and it is a good fit when the furnace still has life left. The heat pump runs on mild days, the furnace takes over below a temperature we set together, and you get cooling out of the same outdoor unit.
Depends on what is out there. If the old system used R-22 or the line set is undersized for the new equipment, we replace it. If it is clean, correctly sized, and compatible, we flush and pressure test it instead of charging you for line you do not need.
On the east side of Highland where afternoon sun load is heavy, a lot. Variable speed equipment runs longer at lower output, which holds temperature steadier and pulls more humidity on the muggy August days. On a smaller shaded home the payback is thinner and we will say so.
Usually, through utility and state efficiency programs, and the amounts change year to year. We check what is active when you get your quote and fill out the paperwork as part of the job rather than handing you a form.
Fifteen years is a fair expectation with annual maintenance, and a heat pump runs year round so that maintenance matters more than it does on a furnace. Skipping it is the single fastest way to turn a fifteen year system into a nine year one.
Get a Real Quote on a Heat Pump System
Measured sizing, both modes verified, rebates handled. Call and a person picks up, 24/7, 365 days a year.
Highland, CA and the surrounding Inland Empire